connect to high.......

connect to high.......

Postby BluesBassPlayer » Sat Sep 19, 2009 5:09 pm

My new 25th Anni, came with a sticker near the input jack,

"Connect to High Impedance Input for Correct Performance".

Would this be the active input mode on my amp? What if my amp doesn't have an active mode?


Jimi
User avatar
BluesBassPlayer
 
Location: The Big Apple (almost)

Re: connect to high.......

Postby bdgotoh » Sat Sep 19, 2009 7:58 pm

Does it have an input pad switch? If no then you can just turn down the input gain.
User avatar
bdgotoh
Bad Ass Evil One
 
Location: Pacific NW

Re: connect to high.......

Postby Ken Baker » Mon Sep 21, 2009 12:42 pm

This is what I posted to you over on the EBMM board...

==========================

The input impedance and the input pad are separate. On the surface, they would appear to be related, but it just ain't the case.

Don't connect the bass (or any other bass or guitar) to a line level input; a studio signal processor, for example. Your basic bass amp, pad in or out, has a high Z input - or at least it should. A direct box is fine as well. You can also use an unbalanced input to a mic preamp, which is what I use.

More to read:

Impedance: basics high impedance and low impedance
Impedance FAQ
WikiAnswers - Why do amplifiers have a high input impedance

Ken...
...at least the doctors find me fascinating...
User avatar
Ken Baker
"Turn the darned thing down!!"
 
Location: Orange County, CA


Return to MUSICMAN



Who is online

Users browsing this forum: No registered users and 1 guest

cron