Neck Tilt Question

Share you tips and tricks here.

Neck Tilt Question

Postby Cheap Bass Tard » Wed Jan 05, 2011 10:08 am

I have a Fender 24 QMT that is a nice bass, but a PITA to set up.

Specifically when I get the neck relief and action set where I want it, it plays decent up to about the 10th-12th fret or so. When I go much higher it's string buzz all over the place. So I end up having to set the action astronomically high which makes it a beast to play.

I have the relief set so that it's 0.019" at the 8th fret with the first fret capo'ed and the string fretted at the 15th fret.

Would adding a shim at the very end of the neck heel, thus reducing the neck angle (making it flatter to the body) be the way to go to reduce the string buzzing at the upper frets and allowing me to set my action where I'd like it without all the buzzing.
USACG J-bass, P-neck, Nordies w/3-band Aggie pre
Atkinson Custom J-bass, P-neck, Nordy Big Singles and 3-band pre.
GB Shuttle 9.0, Uberbass 410
User avatar
Cheap Bass Tard
 
Location: Phoenix

Re: Neck Tilt Question

Postby GonzoBass » Wed Jan 05, 2011 11:14 am

For lowest action
I've always set the neck relief as straight as possible
and when shimming
make sure the shim gets placed between the four screws,
not at the end of the neck,
to prevent the "ski jump" effect.

Here are the cardstock shims I added to a Jay Turser POS
when doing a set up on it for Nick's school-

Image

Image

I hope this helps.
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/

Image

Aloha-
Papa Gonzo
User avatar
GonzoBass
Global Bouncer
 
Location: Hilo, Hawaii
Links: .
Tools:
Steinberger XP2 Workhorse (DB Bridge)
Steinberger XP2 (B-E-A-D)
Steinberger XP2A (Back Up)
Wilkat GonzoBass #001
Fender Deluxe 24 Fret Jazz
EBMM Stingray Natural/Maple
Xavier Custom 6 String
Ibanez AEB10K Acoustic
Dean Rhapsody 8 String
Carvin BK2A Fretless
Gibson EB3 (Project)
Epiphone Newport EBS
Synsonic Half Scale
Fender Mandolin
A couple Flea Ukuleles
and a few guitars...

Rigs:
Small-
GK MB112 combo
Medium-
GK MB500
GK 2x10 Neo
Large-
GK 1001 Mark II 2x10 combo
GK 1x15 RBS

Effects:
Line 6 Bass POD XT Live
BBE 462 Sonic Maximizer

Re: Neck Tilt Question

Postby Rodent » Tue Jan 18, 2011 4:22 pm

+1 to Gonzo's recommendations

all the best,

R

Regenerate Guitar Works
Visit us at the 2014 Winter NAMM Show Booth 1574 - Jan 23-26, 2014

“Popularity is fleeting. … Principles are forever.” - W
User avatar
Rodent
 
Location: Seattle, WA USA
Links: http://www.RegenerateGuitarWorks.com

Re: Neck Tilt Question

Postby iammr2 » Tue Jan 18, 2011 11:25 pm

You'd have to add the shim up at the headstock end of the pocket. Use a really thin one to start though. You'll be able to bring your relief down but if your shim is too thick, the strings will be high up at the body end.
iammr2
 


Return to REPAIRS



Who is online

Users browsing this forum: No registered users and 1 guest

cron